SACC-PG9-SEAL CLM

Sensor/actuator cabling – PLUSCON field Accessories Accessories for the flush-type connectors Special fixing nuts are available for EMCcompliant installation of M12 flush-type connectors on coated or varnished housing surfaces. When tightened, these cut through the surface coating, thus establishing a contact between the housing and the connector. Alternatively, flat seals can be used as a seal between the housing panel and the device connector. Flat seals must be preferred in case of thin walls as the housing cutouts need not be handled here. Note: For further technical data, see: www.phoenixcontact.net/catalog Description EMC hexagonal nuts with fine toothing, for all flush-type connectors with: EMC nut M12 EMC hexagonal nuts with fine toothing, for all flush-type connectors with: EMC nut M16 EMC nut Pg9 Flat seal for all flush-type connectors with: M16 fastening thread Pg9 fastening thread 140 PHOENIX CONTACT Type Order No. Pcs. / Pkt. SACC-M12-KD-NUT-SH 1440151 10 SACC-M16-KD-NUT-SH SACC-PG9-KD-NUT-SH 1440164 1440177 10 10 SACC-M16-SEAL CLM SACC-PG9-SEAL CLM 1430394 1556320 10 10 1 2 3